Auto Collision Technology (ACT) | Pikes Peak State College Academic Catalog

ACT 1001 Introduction to Automotive Collision Technology 4 Credits

Provides an orientation to the automotive collision repair industry which includes an overview of job possibilities and various types of automobile construction. This course covers names, uses, and maintenance procedures for a variety of tools and equipment with a focus on general collision repair and refinishing, shop safety procedures with an emphasis on personal and environmental safety issues, and proper handling and disposal of hazardous materials.

ACT 1011 Metal Welding and Cutting I 3 Credits

Covers sheet metal oxygen-acetylene welding and MIG welding techniques including safety, materials, equipment and setups. Personal and vehicle protective measures prior to welding procedures is presented.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1021 Non-Structural Repair Preparation 3 Credits

Covers the basic characteristics of preparation for automotive repair. Students familiarize themselves with damage analysis, extent of damage, and the sequence of repair. Focuses on removal of vehicle components and protection of panels along with storage and labeling of parts. Safety procedures and equipment use are included.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1022 Panel Repair and Replacements 3 Credits

Covers straightening techniques including tension pulls/stress relief, metal finishing, metal shrinking, and use of fillers. Emphasizes the identification, handling, and replacement of parts such as adjustment and alignment of bolt-on parts, fixed parts, and accessories. Training covers the use of adhesives, sound deadeners and welding methods performed during repairs.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1023 Metal Finishing and Body Filling 3 Credits

Develops skills in metal finishing, metal shrinking, and the use of cosmetic fillers. Emphasis is placed on the use of proper tools required to perform these tasks, including use, selection of tools, and safety procedures for tools and equipment selected. Paintless Dent Repair (PDR) tools will also be introduced in this course along with beginning level repair techniques.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1024 Replace Weld-On Exterior Panel 3 Credits

Covers the replacement of welded-on exterior panels such as quarters, roofs, cab panels, and side panels. Emphasis is placed on the use of proper tools required to perform these tasks, including use, selection, and safety procedures for tools and equipment selected.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1031 Structural Damage Diagnosis 3 Credits

Focuses on methods of frame measurement using dimension charts and service manuals. Includes the use of self-centering gauges and mechanical and electronic measuring. Appropriate terms and definitions of vehicle structures and vehicle diagnosis is covered including identification and analysis of damage. Includes the techniques for basic hook ups and safety procedures used in making corrective pulls.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1032 Structural Damage Repair 3 Credits

Continues the study and application of frame measurement and repair. The student applies methods found in dimension charts and service manuals for vehicle diagnosis and straightening. Training includes the replacement of a structural panel with the identification of damaged suspension components replaced according to manufacturer recommendations.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1042 Surface Preparation I 2 Credits

Performs surface preparation for refinishing including cleaning, sanding, feather edging, chemical treatment of bare materials, and priming. The application of primers includes rationale and use of colored primers and sealers. In addition, the course will cover spot-priming for repaired areas.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C or ACT 1041 (may be taken concurrently) with a minimum grade of C or ACT 141 with a minimum grade of C

ACT 1043 Spray Equipment Operation 2 Credits

Covers the inspection, cleaning and determination of the condition of spray guns and related equipment. Students learn skills for adjusting spray guns by setting-up and testing spray gun operations.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C or ACT 1041 (may be taken concurrently) with a minimum grade of C or ACT 141 with a minimum grade of C

ACT 1044 Refinishing I 2 Credits

Provides the knowledge needed for application and use of automotive paint systems. Course includes locating color codes, mixing formulas, matching, and selections of materials. Proper paint gun use and adjustments is taught for the product being applied. In addition, the student practices correct masking and detailing techniques.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C or ACT 1041 (may be taken concurrently) with a minimum grade of C or ACT 141 with a minimum grade of C

ACT 1051 Plastics & Adhesives I 1 Credit

Designed to teach the state-of-the-art repair for both rigid and flexible plastic components and choosing adhesives using the latest manufacturer repair techniques.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C or ACT 1041 (may be taken concurrently) with a minimum grade of C or ACT 141 with a minimum grade of C

ACT 1060 Custom Painting 3 Credits

This course provides instruction in basic custom paint application such as pearl paints, candy colors, metal flakes, marbleized effect, and neon.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C or ACT 1041 (may be taken concurrently) with a minimum grade of C or ACT 141 with a minimum grade of C

ACT 1064 Hobbyist Paint and Body 4 Credits

Provides an opportunity for current and former students enrolled in the Auto Collision Technology program to practice skills previously learned, using their own vehicles as projects. Any automotive hobbyist who is not a former student may also sign up for the course, however, previous knowledge of basic body working and painting procedures is strongly recommended.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C or ACT 1041 (may be taken concurrently) with a minimum grade of C or ACT 141 with a minimum grade of C

ACT 1065 Automotive Body Customizing I 3 Credits

Covers tool identification welding (mig and resistance), plasma cutting, metal finishing, metal shrinking, and the use of cosmetic fillers. Emphasis is placed on the use of proper tools required to perform body customizing tasks, including use, selection, and safety procedures for tools and equipment selected.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1066 Automotive Body Customizing II 3 Credits

Covers modification of vehicle and vehicle parts such as chopping, measuring, realigning, fabricating, recessing, and shaping.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1067 Automotive Body Customizing III 3 Credits

Covers the completion of modifications that were started in Automotive Body Customizing II along with the addition of body molding kits.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1070 Automotive Collision Technology Lab Experiences I 0-12 Credits

To be determined by the individual instructor. A Course Description will be developed for each course and documented within the course syllabus. Refer to the SFCC Style Guide for Course Description, Required Course Learning Outcome, and Topical Outline guidelines.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1071 Automotive Collision Technology Lab Experiences II 0-12 Credits

To be determined by the individual instructor. A Course Description will be developed for each course and documented within the course syllabus. Refer to the SFCC Style Guide for Course Description, Required Course Learning Outcome, and Topical Outline guidelines.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1072 Automotive Collision Technology Lab Experiences III 0-12 Credits

To be determined by the individual instructor. A Course Description will be developed for each course and documented within the course syllabus. Refer to the SFCC Style Guide for Course Description, Required Course Learning Outcome, and Topical Outline guidelines.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1080 Automotive Collision Repair Internship Level I 0-12 Credits

To be determined by the individual instructor. A Course Description will be developed for each course and documented within the course syllabus. Refer to the SFCC Style Guide for Course Description, Required Course Learning Outcome, and Topical Outline guidelines.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 1081 Automotive Collision Repair Level II Internship 0-12 Credits

To be determined by the individual instructor. A Course Description will be developed for each course and documented within the course syllabus. Refer to the SFCC Style Guide for Course Description, Required Course Learning Outcome, and Topical Outline guidelines.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 2005 Estimating and Shop Management 3 Credits

Initiates written estimates on damaged vehicles. Students learn shop management including work orders, ordering supplies, operating costs, time cards, shop liabilities, employee¿s safety and insurance management issues.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 2007 Customer Relations & Sales 2 Credits

Practices customer relation skills needed to successfully sell service and repairs. During this course students will learn to explain repair processes and how to deal with customers who have a loss and appropriately direct them through the proper procedures of repair.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 2011 Metal Welding and Cutting II 2 Credits

Covers mig welding procedures of seam weld, stitch welds and destructive testing. Resistance spot welding, which includes two-sided spot weld, plasma cutting, safety, materials, and equipment and operating procedures, with emphasis on shop safety are also presented.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 2015 Paintless Dent RepairPaintless Dent Repair 3 Credits

Examines straightening techniques associated with hail dents and door dings and emphasizes the identification of repairable dents and tools used for those repairs. This course includes the use of conventional Paintless Dent Repair (PDR) tools, glue pulling, and induction heating dent removal in aluminum and steel panels. Topics include lighting, damage access, color sanding and polishing, and estimating repair cost.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 2026 Production 4 Credits

Simulates the actual working procedures of an auto collision repair technician. The student performs a variety of structural and non-structural repairs, as well as refinishing operations in accordance with industry procedures, and in compliance with estimates and flat-rate times from collision estimating guides. Students also develop leadership abilities and time management skills.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 2032 Automotive Glass Repair 2 Credits

Covers the removal and replacement of automotive glass using manufacturer's specifications, proper tools, and recommended materials. The course emphasizes the application of skills for the removal and replacement of modular and fixed glass using manufacturer's specifications and procedures.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C

ACT 2043 Refinishing II 2 Credits

In this advanced course students learn the necessary skills used to tint and blend panels working with the latest finishes and paints. Special coatings and procedures are covered in this course.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C or ACT 1041 (may be taken concurrently) with a minimum grade of C or ACT 141 with a minimum grade of C

ACT 2044 Final Detail 2 Credits

Focuses on the detailing procedures in paint refinishing of vehicles. Methods and techniques are specialized to enhance painting skills. Transfers and tapes methods with decals etc. are demonstrated.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C or ACT 1041 (may be taken concurrently) with a minimum grade of C or ACT 141 with a minimum grade of C

ACT 2051 Plastics & Adhesives II 1 Credit

Emphasizes advanced plastic and adhesives. The current state-of-the-art repair for both rigid and flexible plastic components using the latest manufacturer¿s repair techniques are presented. Sheet Molded Compound procedures and the use of proper adhesives is covered.

Prerequisite(s): ACT 1001 (may be taken concurrently) with a minimum grade of C or ACT 101 with a minimum grade of C or ACT 1010 (may be taken concurrently) with a minimum grade of C or ACT 110 with a minimum grade of C